Wiring The Power Inputs - Planet IGS-4215-4P4Tv2 User Manual

 2.1.5 Wiring the Power Inputs
The 6-contact terminal block connector on the top panel of Industrial Managed Switch is used for two DC redundant power input.
Please follow the steps below to insert the power wire.
1. Insert positive/negative DC power wires into Contacts 1 and 2 for Power 1, or 5 and 6 for power.
2. IGS-4215-4P4T/IGS-4215-4P4T2S/IGS-4215-8P2T2S
IGS-4215-4UP4T2S / IGS-4215-8UP2T2S
User's Manual of IGS-4215 PoE Series
V1+ V1- V2+- V2-
V1+ V1- V2+- V2-
38