Wiring The Power Inputs - Planet IGS-504HPT User Manual

3.4 Wiring the Power Inputs

The 6-contact terminal block connector on the top panel of Industrial PoE+
Switch is used for two DC redundant power inputs. Please follow the steps
below to insert the power wire.
When performing any of the procedures like inserting the wires
or tightening the wire-clamp screws, make sure the power is
OFF to prevent from getting an electric shock.
1. The DC power input range is 12V ~ 54V DC. Please insert positive and
negative DC power wires into contacts 1 and 2 for POWER 1, or 5 and 6 for
POWER 2.
1. To avoid damage, please use the Industrial PoE+ Switch
according to its specifications.
2. Please follow the table above for DC input in relation with
maximum PoE budget.
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
DC Input:
V1+
12-54V , 7A max.
PWR1
Figure 3-4: Industrial PoE+ Switch DC Input
DC Input
12V
24V
48V~54V
V2+
Alarm PWR2
Max. PoE Budget
60W
90W
120W
9