Product Features - Planet IGS-4215-4P4Tv2 User Manual

 1.4 Product Features
 Physical Port
■ Eight 10/100/1000BASE-T Gigabit RJ45 copper ports with 4-/8-port IEEE 802.3at/af PoE Injector
■ Two or four 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
■ Two 100/1000BASE-X SFP slots, SFP type auto detection
■ RJ45 console interface for switch basic management and setup
Power over Ethernet

■ Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
■ Backward compatible with IEEE 802.3af Power over Ethernet
■ Up to 4/8 ports of IEEE 802.3af/802.3at devices powered
■ 144-watt PoE budget (IGS-4215-4P4T/IGS-4215-4P4T2S)
■ 240-watt PoE budget (IGS-4215-8P2T2S)
■ Supports PoE power up to 36 watts for each PoE port
■ Auto detects powered device (PD)
■ Circuit protection prevents power interference between ports
■ Remote power feeding up to 100 meters in standard mode and 250m in extend mode
■ PoE management
− Total PoE power budget control
− Per port PoE function enable/disable
− PoE port power feeding priority
− Per PoE port power limitation
− PD classification detection
■ Intelligent PoE features
− PD alive check
− PoE schedule
 Industrial Case and Installation
■ IP30 aluminum case
■ DIN-rail and wall-mount design
■ Supports -40 to 75 degrees C operating temperature
■ Supports Ethernet ESD protection of 6KV DC power
■ Redundant power design
− 48V~54V DC wide power input
 Switching
■ Hardware based 10/100Mbps (half/full duplex), and 1000Mbps (full duplex) mode, flow control and auto-negotiation
and auto MDI/MDI-X
■ Features Store-and-Forward mode with wire-speed filtering and forwarding rates
■ IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
■ 8K MAC address table size
■ 10K jumbo frame
■ Automatic address learning and address aging
User's Manual of IGS-4215 PoE Series
17