Table of Contents
Advertisement
4.8.3 IGMP Static Group
Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages as described in above
sections. For certain applications that require tighter control, you may need to statically configure a multicast service on the
Industrial Managed Switch. First add all the ports attached to participating hosts to a common VLAN, and then assign the
multicast service to that VLAN group.
-
Static multicast addresses are never aged out.
-
When a multicast address is assigned to an interface in a specific VLAN, the corresponding traffic
can only be forwarded to ports within that VLAN.
The IGMP Static Group configuration screens in
The page includes the following fields:
Object
• VLAN ID
• Group IP Address
• Member Ports
Buttons
: Click to add IGMP router port entry.
The page includes the following fields:
Object
• VLAN ID
• Group IP Address
• Member Ports
• Modify
Figure 4-8-10
Figure 4-8-10: Add IGMP Static Group Page Screenshot
Description
Select VLAN ID for this drop-down list.
The IP address for a specific multicast service.
Select port number for this drop-down list.
Figure 4-8-11: IGMP Static Groups Page Screenshot
Description
Displays the current VLAN ID.
Displays the current group IP address.
Displays the current member ports.
Click
to edit parameter.
193
User's Manual of IGS-4215 PoE Series
and
Figure 4-8-11
appear.
Advertisement
Table of Contents
