4.4.5 LACP Port Setting
This page is used to configure the LACP port setting. The LACP Port Setting screens in
appear.
The page includes the following fields:
Object
• Port Select
Priority
•
Timeout
•
Buttons
: Click to apply changes.
Figure 4-4-10: LACP Port Setting Page Screenshot
Description
Select port number for this drop-down list to set LACP port setting.
The Priority controls the priority of the port.
If the LACP partner wants to form a larger group than is supported by this device,
then this parameter will control which ports will be active and which ports will be
in a backup role.
Lower number means greater priority.
The Timeout controls the period between BPDU transmissions.
Short will transmit LACP packets each second, while Long will wait for 30
seconds before sending an LACP packet.
Figure 4-4-11: LACP Port Information Page Screenshot
130
User's Manual of IGS-4215 PoE Series
Figure 4-4-10
and
Figure 4-4-11