Wall-Mount Plate Mounting - Planet IGS-4215-4P4Tv2 User Manual

Industral l2/l4 managed gigabit poe switch

Table of Contents

User's Manual of IGS-4215 PoE Series

 2.2.3 Wall-mount Plate Mounting

To install the Industrial Managed Switch on the wall, please follow the instructions below.

Follow all the DIN-rail installation steps as shown in the example.

Step 1: Remove the DIN rail from the Industrial Managed Switch. Use the screwdriver to loosen the screws to remove the

Step 2: Place the wall-mount plate on the rear panel of the Industrial Managed Switch.

Step 3: Use the screwdriver to screw the wall-mount plate on the Industrial Managed Switch.

Step 4: Use the hook holes at the corners of the wall mount plate to hang the Industrial Managed Switch on the wall.

Step 5: To remove the wall-mount plate, reverse the steps above.