Fault Alarm Configuration - Planet IGS-4215-4P4Tv2 User Manual

4.2.9 Fault Alarm Configuration

This Page facilitates a fault alarm controlling the switch. The Fault Alarm Control Configuration screen in
The page includes the following fields:
Object
• Enable
• Record
• Action
• Power Alarm
• Port Alarm
Buttons
: Click to apply changes.
Figure 4-2-48: Fault Alarm Control Configuration Page Screenshot
Description
Controls whether Fault Alarm is enabled or disabled on this switch.
Controls whether Record is sending System log or SNMP Trap or both.
Controls whether Port Fail or Power Fail or both for fault detecting.
Controls whether DC1 or DC2 or both for fault detecting.
Controls which Ports or all for fault detecting.
User's Manual of IGS-4215 PoE Series
100
Figure 4-2-48 appears.