Rate Limit - Planet IGS-4215-4P4Tv2 User Manual

 4.13.6.7 Rate Limit
After enabling DHCP snooping, the switch will monitor all the DHCP messages and implement software transmission. The
DHCP Rate Limit Setting and Config screens in
The page includes the following fields:
Object
• Port
• State
• Rate Limit (pps)
Buttons
: Click to apply changes
The page includes the following fields:
Object
• Port
• Rate Limit (pps)
Figure 4-13-41
Figure 4-13-41: DHCP Rate Limit Setting Page Screenshot
Description
Select port from this drop-down list.
Set default or user-define.
Configure the rate limit for the port policer. The default value is "unlimited". Valid
values are in the range 1 to 300.
Figure 4-13-42: DHCP Rate Limit Setting Page Screenshot
Description
The switch port number of the logical port.
Displays the current rate limit.
User's Manual of IGS-4215 PoE Series
and Figure 4-13-42 appear.
291