Table of Contents
Advertisement
4.12.4.2 Egress Bandwidth Control
This page provides to select the egress bandwidth preamble. The Egress Bandwidth Control Setting and Status screens in
Figure 4-12-19
and
Figure 4-12-20
The page includes the following fields:
Object
• Port
• State
Rate (Kbps)
•
Buttons
: Click to apply changes.
The page includes the following fields:
Object
• Port
Egress Rate Limit (Kbps)
•
appear.
Figure 4-12-19: Egress Bandwidth Control Settings Page Screenshot
Description
Select port number from this drop-down list.
Enable or disable the port rate policer. The default value is "Disabled".
Configures the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Figure 4-12-20: Egress Bandwidth Control Status Page Screenshot
Description
The switch port number of the logical port.
Displays the current egress rate limit.
User's Manual of IGS-4215 PoE Series
243
Advertisement
Table of Contents
