System Configuration When Emc Directive Is Applicable - Mitsubishi Electric GOT 1000 User Manual

5.2.2

System Configuration when EMC Directive is Applicable

Connection conditions and models where the EMC Directive is applicable are shown below. (Available April,
2005)
About models applicable to the EMC Directive
1
The following table lists the modules compliant with the EMC Directive.
: Compliant with EMC Directive
GT1155-QTBD
GT1155-QSBD, GT1150-QLBD
GT1155-QTBDQ, GT1155-QTBDA, GT1155-QSBDQ,
GT1155-QSBDA, GT1150-QLBDQ, GT1150-QLBDA
Please use the GOT whose hardware version is later than that described.
Confirm the hardware version with the products rating plate.
(Products that the EMC Directive applies to are marked with the CE mark logo.)
(1) GT1155-QTBD, GT1155-QSBD, GT1150-QLBD
(2) GT1155-QTBDQ, GT1155-QTBDA, GT1155-QSBDQ,
: Not compliant with EMC Directive
Item
GRAPHIC OPERATION TERMINAL
GT1155-QSBD
MODEL
IN 20.4 26.4VDC POWER 9.84W MAX
S/N 540001 BC
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
80M1 IND. CONT. EQ
US LISTED
GT1155-QSBDA, GT1150-QLBDQ, GT1150-QLBDA
GRAPHIC OPERATION TERMINAL
MODEL
GT1155-QTBDQ
IN 24VDC
POWER MAX 00W
SERIAL 00007201 DP00001-A
MITSUBISHI ELECTRIC
MADE IN JAPAN
5.2.2 System Configuration when EMC Directive is Applicable
EMC Directive Hardware version
A
B
D
BC
Hardware version
DP
Hardware version
Conformed standard
5.2 EMC DIRECTIVE
1
2
3
4
5
6
7
8
5 - 4