Keywords - Mitsubishi Electric GOT 1000 User Manual

(2) Key functions
The table below shows the functions of the keys that are used for the operation on the parameter
setting screen.
Key

14.4.15 Keywords

Registers, deletes, releases protection for, and sets protection for the FX PLC keywords.
Function usability of the MELSEC-FX list editor for keyword protection levels
1
The functions that can be used with the MELSEC-FX list editor depend on the keyword protection level.
Function
Displaying sequence
Reading
programs
sequence
Searching commands/
programs
devices
Writing commands
Writing
sequence
Changing operands/set
programs
values
Inserting commands
Deleting commands
Sequence program all clear
PLC diagnostics
Parameter setting
*1 When the 2nd keyword is set to an FX PLC that supports 2nd keyword, it becomes "
*2 The names within the parentheses ( ) are for when a keyword + 2nd keyword is set.
Initializes the parameters
Completes the changed setting contents.
Ends parameter setting.
Keyword protection level
Read/Incorrect write
All operation protect
protection
(All on-line operation
(Read/write protect)
*2
protect)
*2
*1
Function
:
( Available,
Incorrect write
Keyword not
protect (Write
registered/keyword
*2
protection canceled
protect)
" (cannot be used).
14.4 MELSEC-FX List Editor
14.4.15 Keywords
9
10
11
12
:
Unavailable)
Reference
13
Subsection
14.4.7
Subsection
14.4.8
Subsection
14.4.9
14
Subsection
14.4.10
Subsection
14.4.9
Subsection
14.4.11
15
Subsection
14.4.12
Subsection
14.4.13
Subsection
14.4.14
16
14 - 107