Operation Settings; Operation Setting Functions - Mitsubishi Electric GOT 1000 User Manual

11.3 Operation Settings

11.3.1 Operation setting functions

Setting regarding GOT operation can be set.
The items which can be set are described below.
Function
Buzzer volume setting
Window move buzzer volume setting
Security setting screen change
Utility call key screen change
Key sensitivity setting
*1 Relationship between the "key sensitivity" setting and the "key reaction speed"
The relationship between "key sensitivity" and "key reaction speed" is shown in the table below.
•Decreasing the "key sensitivity" value will speed up the key reaction speed.
•Increasing the "key sensitivity" value will slow down the key reaction speed.
"Key sensitivity" setting value
"Key reaction speed" [ms]
When the GOT screen recognizes a single touch as two touches, decrease the "key sensitivity" (to slow
down the key reaction speed).
Operation settings by drawing software
Buzzer volume setting can be changed.
Whether turn ON/OFF buzzer when move window
can be selected.
Security level change screen can be displayed.
Section 11.4 Security Level Change
Utility call key setting screen can be displayed.
Section 11.5 Utility Call Key Setting
The sensitivity of touch panel when GOT screen is
touched can be set.
8 7
-20 -10 Standard(±0)
Set buzzer volume and window move buzzer volume by [GOT setup] in [System
Environment] of GT Designer2.
When using GT Designer3, execute the settings at [GOT Setup...] of [GOT
Environmental Setting].
When change a part of the setting, change the setting by the GOT display setting
after downloading the project data.
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Contents
6 5 4
+10 +20
Screen Design Manual
11.3 Operation Settings
11.3.1 Operation setting functions
Setting range
OFF/SHORT/LONG
<At factory shipment:
SHORT>
ON/OFF
<At factory shipment:
ON>
*1
1 to 8
3 2 1
+40 +80 +120
11 - 10
9
10
11
12
13
14
15
16