9 - 5
9.3 Utility Display
Switching the display language of the utility
(1) When starting the GOT without selecting any language or the selected language
and the installed fonts are not matched.
The following screen will be displayed.
Touching the button of a desired language restarts the GOT and the language is
switched to the selected one.
(2) Switching the display language of the utility by devices
Any device can be used for switching the display language of the utility.
For details, refer to the following.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
When using devices to switch the display language of the utility, it does not change
even if the display language is switched from the GOT utility screen.