Parameter Setting - Mitsubishi Electric GOT 1000 User Manual

14.4.14 Parameter setting

Sets FX PLC parameters.
Parameters that can be changed and change targets
1
(1) Parameters that can be changed
The parameters that can be changed with the MELSEC-FX list editor and the target FX PLCs are
as follows.
Item
Memory space setting
File register space setting
Latch range setting
RUN terminal setting
Initialization of parameters
*1 When connecting an FX0(S), set "0".
Setting other than "0" causes a parameter error.
*2 When the parameters are initialized, the display on the MELSEC-FX list editor is different from the FX PLC default values, but
do not change the latch range. Changing the latch range causes an error.
(2) Change targets
When a memory cassette is mounted, the parameters in the memory cassette are targeted for
changes.
Operation
2
*1
Stop the FX PLC
*1 When checking parameters (not changing), it is not necessary to stop the PLC.
FX0(S)
FX1 FX2(C)
/FX0N
*1
*2
OP [Parameter setting]
*1
Stop the FX PLC
OP Select [Parameter setting] with
GO
( : Can be set/changed
Target CPU
FX1S FX1N(C) FX2N(C)
*2 *2
GO
or .
14.4 MELSEC-FX List Editor
14.4.14 Parameter setting
: Cannot be set/changed)
FX3S FX3G(C) FX3U(C)
14 - 105
9
10
11
12
13
14
15
16