Built-In Interface Specifications - Mitsubishi Electric GOT 1000 User Manual

3.3 Built-in Interface Specifications

• GT1155-QTBD, GT1155-QSBD, GT1150-QLBD
Item
RS-422
Built-in
Interface
RS-232
USB
CF card
Option function
*1
board
*1:
*2:
3 - 6
3.3 Built-in Interface Specifications
• RS422, 1ch
Transmission speed :115,200/57,600/
Connecter type
Use
• RS422/485, 1ch
Transmission speed :115,200/57,600/
Connecter type
Use
Terminating resistor
(Switched by terminating resistor selector
switch) (At factory shipment: 330 )
(Compatibility with the serial multi-drop
connection: Hardware version C or later)
RS232, 1ch
Transmission speed : 115,200/57,600/38,400/19,200/9,600/4,800bps
Connecter type
Use
USB (Full Speed 12Mbps), device, 1ch
Connector type
Use
PCMCIA, compact flash slot, 1ch
Connector type
Use
For mounting the option function board 1ch
Necessity of mounting the option function board may offer depending on the hardware version.
Refer to the following for details.
Section 8.3 Option Function Board
Set the terminating resistor selector switch of the GOT in accordance with the connection type when adopting
GOT multidrop connection. For details of GOT multidrop connection, refer to the following.
Section 8.9 Serial Multi-Drop Connection Unit
Specifications
GT1155-QTBD
38,400/19,200/
9,600/4,800bps
: D-sub 9-pin (female)
: PLC communication
38,400/19,200/
9,600/4,800bps
: D-sub 9-pin (female)
: PLC communication
*2
: Open/110 /330
: D-sub 9-pin (male)
: PLC communication, barcode reader, RFID connection, PC
communication (project data upload/download, OS installation,
transparent function)
: Mini-B
: PC communication (project data upload/download, OS
installation, transparent function)
: For TYPE I only
: Data transmission and storage
GT1155-QSBD
GT1150-QLBD
• RS422, 1ch
Transmission speed :115,200/57,600/
38,400/19,200/
9,600/4,800bps
Connecter type : D-sub 9-pin (female)
Use : PLC communication
• RS422/485, 1ch
Transmission speed :115,200/57,600/
38,400/19,200/
9,600/4,800bps
Connecter type : D-sub 9-pin (female)
Use : PLC communication
*2
Terminating resistor : Open/110 /330
(Switched by terminating resistor selector
switch) (At factory shipment: 330 )
(Compatibility with the serial multi-drop
connection: Hardware version F or later)