Mitsubishi Electric GOT 1000 User Manual page 194

Precautions
7
(1) Monitoring and testing real number data
Real number data cannot be monitored and tested.
All word devices containing real number data are monitored in integer data (binary data).
(2) Monitoring devices in 32-bit (two-word) module
When monitoring word devices (T, C, D, W, etc.) in 32-bit (two-word) module, those with 32 bits of
data remaining are monitored.
Devices with 16 bits (one-word) of data remaining are not monitored.
If an odd number is specified for the first monitor device number, the last device number of the
specified controller will not be displayed.
(Example) When the data entry of the A2NCPU is monitored in units of 32 bits from odd numbers
(3) Changing the T/C set values of large-size and small-size QnACPUs and displaying device
comments
The T/C set values of QnACPUs whose date on the CPU rating plate is after [9707B] can be
changed, and device comments can be displayed.
<Information on the rating plate>
(4) Programs capable of changing timer/counter set values
• Only the main program can change the timer/counter set values of AnNCPUs, AnACPUs, and
AnUCPUS.
• When executing multiple programs with the QCPU (Q mode) and QnACPU, setting values of
timer/counter can be changed only to the program (scan execution type program set at the
lowest number among them in parameter settings of GX Developer) whose file name is
displayed on the TC Monitor screen.
Note that a file to be displayed cannot be changed on the GOT.
(5) Z0 of Q/QnACPUs and Z0 and V0 of ACPUs
• Z0 of Q/QnACPUs and Z0 and V0 of ACPUs are displayed as Z and V respectively.
14 - 12
14.2 System Monitor
14.2.1 Specifications
(D1, D3 ...)
D1017 D1018 D1019 D1020 D1021 D1022 D1023 (Device name)
Unit of monitor display
PROGRAMMBLE CONTROLLER
DATE 9707 B
Function version
Date of manufacture
Nothing displayed