Display Operation Of Main Menu - Mitsubishi Electric GOT 1000 User Manual

9.3.1

Display operation of main menu

The following four types of operation can display the main menu.
(Display the main menu after installing the Standard monitor OS from drawing software to the GOT Flash
memory (Internal).)
(1) When project data is undownloaded
After the GOT is turned on, a dialog box for notifying of absence of project data is displayed. After
the dialog box is displayed, touch the
GOT power on
Touch the OK button.
(2) When touching menu call key
If you touch the menu call key while user-created screen is displayed, the main menu is displayed.
The menu call key can be set by the GOT utility or drawing software.
(At factory shipment, the GOT is set to "Simultaneous 2-point presses on GOT screen upper-right
and upper-left corners".)
Menu call key Simultaneous 2-point touch
Horizontal format
*: The utility screen is a factory installed horizontal format screen that cannot be edited.
When the utility call key is set to the zero point
OK
Vertical format *
Even when the utility call key is set to the zero point, you can display the main menu
using either of the following two operations:
• Pressing the special function switch set on the user-created screen
• Powering ON the GOT while touching the upper left corner of the screen
button to display the main menu.
9.3.1 Display operation of main menu
9 - 6
9.3 Utility Display
9
10
11
12
13
14
15
16