Mitsubishi Electric GOT 1000 User Manual page 141

(1) Setting another key position when there are two
Make the setting after changing either one of the key positions from
Three of cannot be set at the same time.
Example: When changing the two positions from the upper left and upper right
corners to the upper left and lower left corners
Change the upper right
(2) When the utility call key is set to the zero point
Refer to the following for the utility screen displaying method:
• Pressing the special function switch set on the user-created screen
• Powering ON the GOT while touching the upper left corner of the screen
Section 9.3.1 Display operation of main menu
(3) When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using
the drawing software.
If a user tries to display the main menu of the utility, the password is displayed.
Refer to the following for details on setting passwords.
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
to . Change the lower left
Screen Design Manual
11.5 Utility Call Key Setting
11.5.3 Utility call key setting operation
9
to .
10
11
to .
12
13
14
15
16
11 - 18