Mitsubishi Electric GOT 1000 User Manual page 55

GT1155-QTBDQ, GT1155-QSBDQ, GT1150-QLBDQ, GT1155-QTBDA,
2
GT1155-QSBDA, GT1150-QLBDA
1)
2) 3)
9)
3)
No. Name
1) Bus interface
2) RS-232 interface
3) Hole for unit installation fitting
4) Rating plate (nameplate)
5) CF card access LED
6) CF card access switch
7) CF card cover
8) Battery cover
9) Power terminal
10) CF card interface
11) CF card eject button
12) Battery
6)
4) 5) 3) 10)
7)
8)
3)
CF card cover opened
Compatible GOT : GT1155-QTBDQ, GT1155-QSBDQ, GT1150-QLBDQ
Use : For connection to QCPU (Q mode)/motion controller
Compatible GOT : GT1155-QTBDA, GT1155-QSBDA, GT1150-QLBDA
Use : For connection to QnA/ACPU/motion controller CPU
For communicating with controller (bar code reader, RFID) or personal
computer (OS installation, project data download, transparent) (D-sub 9-
pin male)
Hole for the inserting installation fittings (accessory) during the GOT
installation to the panel (4 holes at top and bottom)
Lit: CF card accessed Not lit: CF card not accessed
Switch for prohibiting access to CF card before removing the CF card from
the GOT
ON : CF card being accessed (CF card removal prohibited)
OFF : No access to CF card (CF card removal possible)
Open or close when inserting or removing the CF card.
Open or close when replacing the battery.
Power terminal and FG terminal (for power supply (24VDC) to GOT and
grounding)
Interface for installing the CF card to GOT
Button for removing the CF card
GT11-50BAT battery for storing clock data, alarm history, recipe data and
time action setting value
(The project data is stored in the built-in flash memory.)
11)
Battery cover opened
12)
Power supply terminal layout
Specifications
CPU (Q series)
(A series)
-
4.2 Back Panel
1
2
3
4
5
6
7
8
4 - 4