Mitsubishi Electric GOT 1000 User Manual page 112

10 - 4
10.1 Communication Setting
10.1.3 Description of communication setting screen
Precautions for communication between GOT and connected devices
(1) Installing [Communication driver] and downloading [Communication Settings]
To perform communication with the connected device, the following actions are
necessary.
1) Installing [Communication driver] (Up to 4, OS installation)
2) Assigning channel number and communication driver to communication
interface (Communication Setting)
3) Downloading [Communication Settings] (project data) assigned in step 2)
Perform 1), 2) and 3) with drawing software.
For [Communication Settings], refer to the following manual.
GT Designer 2 Version
GT Designer 3 Version1 Screen Design Manual (Fundamentals)
For installation of [Communication driver] (OS) and download of project data, refer
to the following manual.
GT Designer 2 Version
GT Designer 3 Version1 Screen Design Manual (Fundamentals)
(2) When [Communication Settings] has not been downloaded using drawing
software
(GT1155-QTBD, GT1155-QSBD and GT1150-QLBD only)
When [Communication Settings] has not been downloaded, the GOT
automatically assigns the installed communication driver as the RS422 interface.
When multiple communication drivers are installed, the GOT automatically
assigns the first-installed communication driver to the RS422 interface.
To assign the communication driver to the RS-232 interface or to change the
already assigned communication driver, change the settings in the
[Communication Settings] of the utility screen or in the [Communication Settings]
of drawing software.
On the unit that only allows a bus connection, the installed bus communication
driver is assigned to the bus interface.
(a) After automatic assignment
If the button is clicked to store the settings in the GOT after automatic
OK
assignment, the automatic assignment will not be executed from the next
startup.
(b) Priority of [Communication Settings] of drawing software
When [Communication Settings] is downloaded to the GOT from drawing
software after automatic assignment, the GOT will operate according to the
[Communication Settings] of drawing software.
Screen Design Manual
Basic Operation/Data Transfer Manual