14.2.23 Procedure for BM monitor basic operation
When no devices are entered
MENU
Touch
TEST
Touch
If necessary, perform Quick test operation.
Subsection 14.2.8 Quick test
operation of monitor devices
14 - 40
14.2 System Monitor
14.2.23 Procedure for BM monitor basic operation
Touch
"BM MON"
FORM
Touch
If necessary, switch the screen display.
Subsection 14.2.7 Switching the
display format (DEC/HEX) and
comment/no-comment display
If necessary, perform the following:
Entering monitor devices:
devices (specifying monitor stations and devices)
As shown below, set a unit and buffer memory.
I/O No.[
]
[
Test operation
Subsection 14.2.24 Test operation
Display example when devices
are already entered
SET
Touch
Subsection 14.2.5 Entering monitor
]
Set the initial device number of
the buffer memory in decimal.
Set the first two digits of the
three-digit initial I/O signal
of the module.
MENU
Touch