Mitsubishi Electric FR-E800 Instruction Manual page 37

NOTE
• To display the set frequency in the standard model, press the setting dial while the inverter runs in the PU operation mode or
in the External/PU combined operation mode 1 (Pr.79 = "3"). (Refer to
• The frequency can be set without pressing the SET key when Pr.161 Frequency setting/key lock operation selection = "1
or 11". (Refer to
Parameters referred to
Pr.7 Acceleration time, Pr.8 Deceleration
Pr.79 Operation mode selectionpage 280
36
2. Basic Operation
2.5 Basic operation procedure (PU operation)
page 231.)
timepage 262
page 348.)