Table of Contents
Advertisement
6. Push and release the up arrow button to exit the
instrument cluster display screen.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within ten seconds.
3. Without pushing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
DISPLAY MENU ITEMS
Push and release the up or down arrow button until the
desired selectable menu icon is highlighted in the
instrument cluster display.
Refer to "Instrument Cluster Display" in this chapter for
further information.
Speedometer
Push and release the up or down arrow button until the
speedometer menu item is highlighted in the instru-
ment cluster display. Push and release the right arrow
button to cycle the display between mph and km/h.
Vehicle Info
Push and release the up or down arrow button until the
Vehicle Info menu item is highlighted in the instrument
cluster display. Push and release the right arrow button
to enter the submenus items of Vehicle Info. Follow the
directional prompts to access or reset any of the follow-
ing Vehicle Info submenu items:
•
Tire Pressure
•
Coolant Temperature
•
Transmission Temperature — If Equipped
•
Oil Temperature
•
Oil Pressure
•
Exhaust Brake — If Equipped
•
Turbo Boost — If Equipped
•
Oil Life
•
Fuel Filter Life — If Equipped
•
Battery Voltage
•
Gauge Summary
•
Engine Hours
Driver Assist — If Equipped
The Driver Assist menu displays the status of the Adap-
tive Cruise Control (ACC) and LaneSense systems.
Push and release the up or down arrow button until the
Driver Assist menu is displayed in the instrument clus-
ter display.
Adaptive Cruise Control (ACC) Feature
The instrument cluster display displays the current ACC
system settings. The information displayed depends on
ACC system status.
Push the Adaptive Cruise Control (ACC) on/off button
(located on the steering wheel) until one of the follow-
ing displays in the instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read "Adaptive
Cruise Control Off."
GETTING TO KNOW YOUR INSTRUMENT PANEL
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting
has not been selected, the display will read "Adaptive
Cruise Control Ready."
Push the SET + or the SET- button (located on the steer-
ing wheel) and the following will display in the instru-
ment cluster display:
ACC SET
When ACC is set, the set speed will display in the instru-
ment cluster.
The ACC screen may display once again if any ACC activ-
ity occurs, which may include any of the following:
•
Distance Setting Change
•
System Cancel
•
Driver Override
•
System Off
•
ACC Proximity Warning
•
ACC Unavailable Warning
For further information, refer to "Adaptive Cruise Con-
trol (ACC) — If Equipped" in "Starting And Operating."
LaneSense — If Equipped
The instrument cluster display displays the current
LaneSense system settings. The information displayed
depends on LaneSense system status and the condi-
tions that need to be met. For further information, refer
to "LaneSense — If Equipped" in "Starting And
Operating."
Fuel Economy
Push and release the up or down arrow button until the
Fuel Economy menu item is highlighted in the instru-
ment cluster display. Push and Hold the right arrow but-
ton to reset Average Fuel Economy.
•
Current Fuel Economy Gauge
93
3
Advertisement
Table of Contents
