Table of Contents
Advertisement
Lane Sense On Message
To turn the LaneSense system off, push the LaneSense
button again (LED turns on).
NOTE:
The LaneSense system will retain the last system state
(on or off) from the last ignition cycle when the ignition
is placed in the ON/RUN position.
LANESENSE WARNING MESSAGE
The LaneSense system will indicate the current lane
drift condition through the instrument cluster display.
When the LaneSense system is on, the lane lines are
gray when both of the lane boundaries have not been
detected and the LaneSense telltale
System ON (Gray Lines) With White Telltale
Left Lane Departure — Only Left Lane Detected
•
When the LaneSense system is on, the LaneSense
Telltale
is solid white when only the left lane
marking has been detected and the system is ready
to provide visual warnings in the instrument cluster
display if an unintentional lane departure occurs on
the left side.
•
When the LaneSense system senses the lane has
been approached and is in a lane departure situa-
tion, the visual warning in the instrument cluster
display will show the left lane line flashing yellow
(on/off). The LaneSense telltale
solid white to flashing yellow.
is solid white.
STARTING AND OPERATING
Lane Crossed (Flashing Yellow Lane Line) With Yellow
NOTE:
The LaneSense system operates with similar behavior
for a right lane departure when only the right lane
marking has been detected.
Left Lane Departure — Both Lane Lines Detected
•
When the LaneSense system is on and both the
lane markings have been detected, the system is
"armed" to provide visual warnings in the instrument
cluster display and a torque warning in the steering
wheel if an unintentional lane departure occurs. The
changes from
lane lines turn from gray to white and the Lane-
Sense telltale
225
Telltale
5
is solid green.
Advertisement
Table of Contents
