Table of Contents
Advertisement
396
MULTIMEDIA
Transferring/Call Continuation
Transferring
The ongoing calls can be transferred from the mobile
phone to the system and vice versa without ending the
call.
To transfer the call, press the Transfer button.
Call Continuation
After the engine is switched off, it is still possible to
continue a phone call.
The call continues until it is ended manually or for a
maximum period of about 20 minutes.
When the system is switched off, the call is transferred
to the mobile phone.
Ending A Call
Press the End button on the touchscreen or the PHONE
button on the steering wheel controls to end a call in
progress.
Only the ongoing call is ended and any call on hold
becomes the new active call.
Depending on the type of mobile phone, if the ongoing
call is ended by the caller, the call on hold may not be
activated automatically.
Uconnect Phone Features
MUTE/UNMUTE
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the beep, say "mute" or "mute off".
READING MESSAGES
The system can read the messages received by the
mobile phone.
To use this function, the mobile phone must support
the SMS exchange function via Bluetooth®.
If this function is not supported by the phone, the corre-
sponding message button is deactivated (grayed out) or
may only accept incoming messages.
When a text message is received, the display will show
a screen where the options "Listen", "Call" or "Ignore"
can be selected.
Press the Message button to access the list of SMS
messages received by the mobile phone. The list dis-
plays a maximum of 60 messages received.
BROWSING SMS
Using the steering wheel commands, you can view and
manage the last 10 SMS messages received on the
instrument panel. To use this function, the mobile
phone must support the SMS exchange function
through Bluetooth®.
Select the PHONE button on the instrument panel
menu, and then select "SMS Reader" using the arrow
keys on the steering wheel controls.
The "SMS Reader" submenu allows the last 10 SMS
messages to be displayed.
STEERING WHEEL AUDIO CONTROLS —
IF EQUIPPED
The remote sound system controls are located on the
back surface of the steering wheel. Reach behind the
wheel to access the switches.
Steering Wheel Audio Controls
The right-hand control is a rocker type switch with a
push button in the center. Pushing the top of the switch
will increase the volume, and pushing the bottom of the
switch will decrease the volume.
Pushing the center button will make the radio switch
between the various modes available (AM/FM/SXM or
Media etc.).
The left-hand control is a rocker type switch with a push
button in the center. The function of the left-hand con-
trol is different depending on which mode you are in.
The following describes the left-hand control operation
in each mode.
RADIO OPERATION
Pushing the top of the switch will SEEK up for the next
listenable station and pushing the bottom of the switch
will SEEK down for the next listenable station.
The button located in the center of the left-hand control
will tune to the next preset station that you have pro-
grammed in the radio preset button.
Advertisement
Table of Contents
