Table of Contents
Advertisement
228
STARTING AND OPERATING
The ParkView Camera is located in the center of the
tailgate handle.
NOTE:
If snow, ice, mud, or any foreign substance builds up on
the camera lens, clean the lens, rinse with water, and
dry with a soft cloth. Do not cover the lens.
Zoom View
When the Rear View Camera image is being
displayed, and the vehicle speed is below
8 mph (13 km/h) while in any gear selector
position, Zoom View is available. By pressing
the "magnifying glass" icon in the upper left of the dis-
play screen, the image will zoom in to four times the
standard view. Pressing the icon a second time will
return the view to the standard Backup Camera display.
When Zoom View is selected while the vehicle is in
REVERSE, then shifted to DRIVE, the camera delay view
will display the standard Backup Camera view. If the
vehicle is then returned to REVERSE gear from DRIVE,
the Zoom View selection will automatically resume.
Shifting to NEUTRAL from any gear will maintain the
selected view (Zoom or Standard) as long as the vehicle
is below 8 mph (13 km/h).
If the vehicle is in PARK, Zoom View is available until
the gear selector is placed in DRIVE or REVERSE.
NOTE:
•
If the vehicle is in DRIVE, NEUTRAL, or REVERSE,
and speed is greater than or equal to 8 mph
(13 km/h), Zoom View is unavailable and the icon
will appear gray.
•
While in Zoom View, the guidelines will not be
visible.
AUX CAMERA — IF EQUIPPED
Your vehicle may be equipped with one or two AUX Cam-
eras, which display rearview and side view images from
the trailer on the touchscreen.
Activation
The AUX Camera is activated by first pressing the
Backup Camera, Cargo Camera (if equipped), or Sur-
round View Camera (if equipped) button on the touch-
screen, followed by the AUX button located in the upper
left corner of the rearview display. The AUX camera can
also be activated when the vehicle is in REVERSE by
pressing the AUX button.
If equipped with two AUX Cameras, you can switch
between each camera by pressing the AUX1 or
AUX2 buttons on the Trailer Camera display.
AUX1 Camera Button
AUX2 Camera Button
Deactivation
The AUX Camera is deactivated by pressing the "X" in
the upper right corner of the touchscreen. This will
return the display back to the previously displayed
screen.
NOTE:
•
If the AUX button is pressed and no AUX Camera is
connected, the touchscreen will display a blue
screen along with the message "Camera System
Unavailable." The screen can be exited out by press-
ing the "X" in the upper right hand corner. This will
return the display back to the previously displayed
screen.
•
Zoom View is not available with the AUX Camera
feature.
•
The display will always default to the Trailer Camera
display (AUX 1).
SURROUND VIEW CAMERA SYSTEM —
IF EQUIPPED
Your vehicle may be equipped with the Surround View
Camera system that allows you to see an on-screen
image of the surroundings and Top View of your vehicle
whenever the gear selector is put into REVERSE or
manually activated via the Uconnect system. The Top
View of the vehicle will show which doors are open. The
image will be displayed on the touchscreen display
along with a caution note "Check Entire Surroundings"
across the top of the screen. After five seconds, this
note will disappear. The Surround View Camera system
is comprised of four sequential cameras located in the
front grille, rear tailgate and side mirrors.
NOTE:
The Surround View Camera system has programmable
settings that may be selected through the Uconnect
System. Refer to "Uconnect Settings" in "Multimedia"
for further information.
Advertisement
Table of Contents
