Table of Contents
Advertisement
208
STARTING AND OPERATING
ADAPTIVE CRUISE CONTROL (ACC)
OPERATION
The speed control buttons (located on the right side of
the steering wheel) operate the ACC system.
Adaptive Cruise Control Buttons
1 — Adaptive Cruise Control On/Off Button
2 — Normal (Fixed Speed) Cruise Control On/Off Button
3 — CANCEL
4 — Distance Button
5 — RES (+)
6 — SET (-)
NOTE:
Any chassis/suspension or tire size modifications to the
vehicle will affect the performance of the Adaptive
Cruise Control and Forward Collision Warning System.
ACTIVATING ADAPTIVE CRUISE
CONTROL (ACC)
You can only engage ACC if the vehicle speed is above
0 mph (0 km/h).
The minimum set speed for the ACC system is 20 mph
(32 km/h).
When the system is turned on and in the ready state,
the instrument cluster display will read "ACC Ready."
When the system is off, the instrument cluster display
will read "Adaptive Cruise Control (ACC) Off."
NOTE:
You cannot engage ACC under the following conditions:
•
When in Four-Wheel Drive Low.
•
When you apply the brakes.
•
When the parking brake is applied.
•
When the automatic transmission is in PARK,
REVERSE or NEUTRAL.
•
When the vehicle speed is outside of the speed
range.
•
When the brakes are overheated.
•
When the driver door is open at low speed.
•
When the driver seat belt is unbuckled at low speed.
•
When the Electronic Stability Control (ESC) Full Off
mode is active.
TO ACTIVATE/DEACTIVATE
Push and release the Adaptive Cruise Control (ACC)
on/off button. The ACC menu in the instrument cluster
displays "ACC Ready."
Adaptive Cruise Control Ready
To turn the system off, push and release the Adaptive
Cruise Control (ACC) on/off button again. At this time,
the system will turn off and the instrument cluster dis-
play will show "Adaptive Cruise Control (ACC) Off."
Adaptive Cruise Control Off
Advertisement
Table of Contents
