Communication Settings - Xylem FLYGT Pareo DCM 711 Installation, Operation And Maintenance Manual

8 User Interface
Alarm
Motor overtemperature

8.4.4 Communication settings

WLAN
Part
Enabled
SSID
Password
Local IP address
Subnet mask
Default gateway
Regulatory domain
Modbus TCP
• Slave address
Bluetooth
Part
Enabled
Ethernet
Part
Local IP address
Subnet mask
Default gateway
Modbus TCP
• Slave address
RS-485
Modbus RTU
40
Default value Values
500 h Interval
• 1–10000 h
Enabled Reset required
• Disabled
• Enabled
Default value Values
Disabled • Disabled
• Enabled
- More than 4 characters
- More than 4 characters
192.168.1.50 0.0.0.0-255.255.255.255
255.255.255.0 0.0.0.0-255.255.255.255
192.168.1.1 0.0.0.0-255.255.255.255
FCC • FCC
• ETSI
• TELEC
1 1–247
Default value Values
On • On
• Off
Default value Values
192.168.1.20 0.0.0.0-255.255.255.255
255.255.255.0 0.0.0.0-255.255.255.255
192.168.1.1 0.0.0.0-255.255.255.255
1 1–247
DCM 711 Installation, Operation, and Maintenance Manual
Description
The delay from the time
that the alarm is
triggered, until the alarm
is active again.
• Disabled
The alarm resets
automatically.
• Enabled
The alarm must be
reset manually.
Description
The option to enable or
disable WLAN
The name of the network
The password of the
selected WLAN network
The settings for
communication by
Ethernet
The option to select the
regulatory domain
The settings for
communication by Modbus
TCP
Description
The option to turn on or
turn off Bluetooth
Description
The settings for
communication by
Ethernet
The settings for
communication by Modbus
TCP