Settings - Xylem WTW MIQ/CHV PLUS Operating Manual

Settings

4
The MIQ/CHV PLUS module has a valve output.
The MIQ/CHV PLUS valve module registers on the IQ S
a valve output (V) and appears in the list of outputs.
On an IQ S
 assign a name to the valve output (with the 184 XT, 2020 XT, 28x and
 link the valve output to a sensor
 erase the link of the valve output with a sensor
 set the valve output
 check the state of the valve output
Functions for the Valve output:
valve output
 Cleaning
 Sensor-controlled
 Manual control
16
All manuals and user guides at all-guides.com
Settings
N terminal, you can
ENSOR ET
2020 3G systems only.
(Setting of the cleaning procedure in the menu, Settings of outputs and links)
(Setting of the cleaning procedure in the menu, Settings of sensors and diff.
sensors of the relevant sensor)
The following informations are given in the system operating manual
for your IQ S
ENSOR
 general operating principles
 settings for the valve outputs
N system:
ET
ba75539d03
MIQ/CHV PLUS
N system as
ENSOR ET
03/2018