System Setup And Operation; Commissioning; Run The Setup Wizard - Xylem FLYGT Pareo DCM 711 Installation, Operation And Maintenance Manual

5 System Setup and Operation

5 System Setup and Operation

5.1 Commissioning

1. Turn on the controller.
2. Select one of the following actions:
For more information, see
page 24.

5.2 Run the Setup Wizard

Run the wizard.
Menu
Language
Pump sensor setup Select the setup of the pump sensors.
Nominal voltage
Nominal current
System units
Select the date
Select the time
Pump name
Site name
Pump control mode Select the pump control mode.
Start condition
Stop condition
Snore setup
For a list of all the values, see
24
Condition Action
First start of a control box Run the Setup Wizard.
The unit starts with the selected values.
First start of a control 1. Run the Setup Wizard.
module
2. Configure the control module and the pump module.
Restart of a controller 1. Go to Settings > Back up/restore > Controller > Factory reset.
with the default settings.
2. Confirm to continue with the reset.
3. Run the Setup Wizard.
The unit restarts with the selected values.
Action
Select the language.
This option only appears if the controller is not able to detect the pump module.
Type the nominal voltage of the pump.
This option only appears if the controller is not able to detect the pump module.
Type the nominal current of the pump.
This option only appears if the controller is not able to detect the pump module.
Select metric or imperial system.
Select the date.
Select the time.
Type a pump name or select an existing pump.
Type a site name or select an existing site.
Select the start condition of the automatic control mode.
Select the stop condition of the automatic control mode.
– Skip the snore setup to use the default reference power.
– Select Run pump in hand mode to detect power to find the reference power or
to enter the value manually.
The unit starts with the selected values.
Configuration with a configuration file
For more information, see
page 30.
User Interface
on page 33 and
Setup Wizard
on page 42.
DCM 711 Installation, Operation, and Maintenance Manual
Run the Setup Wizard
on
on