Table of Contents
Advertisement
Section
4
5
9.3 Standards and approvals: further information
This section gives additional information to the approvals information in section
page 9.
9.3.1 IP rating
IPXY
1 2 3
Control box
IP65
Control module
• Front side: IP65, not evaluated by UL
• Back side: IP20
Degree of protection, IP65
Code
6
5
Degree of protection, IP20
Code
2
0
DCM 711 Installation, Operation, and Maintenance Manual
Terminal
+24V
20
Cellular
RS485 A
21
Shield
22
cellular
RS485 B
23
0V cellular 24
RL Y_COM 25
RL Y_FWD 26
RL Y_REV 27
RL Y_RUN 28
RL
29
Y_FAULT
V1
30
V2
31
V3
32
1. Ingress Protection Code (IP)
2. Degree of protection against foreign objects
3. Degree of protection against water
Description
The enclosure is dust-tight.
The enclosure is protected against jets of water.
Description
The enclosure is protected against:
• Fingers or objects that are less than 80 mm (3.15 in) in length
• Objects that are larger than 12.5 mm (0.49 in) in diameter
The enclosure is not protected against water.
Description
RS-485 Modbus slave
120 R termination
24 V
250 mA
Common for all relays
Output for forward contactor
Output for reverse contactor
Output (N/O) for run signal
Output (N/O) for fault signal
Analog differential, V1–V2
Analog differential, V2–V3
Analog differential, V3–V1
9 Technical Reference
30 VDC / 5A,
(SELV) resistive
250 VAC / 1A,
OV II resistive/
general use
PD 2
Pilot duty C300
1000 VAC
Approvals
on
49
Advertisement
Table of Contents
