Setup Wizard - Xylem FLYGT Pareo DCM 711 Installation, Operation And Maintenance Manual

8 User Interface
Back up/restore
Part
Controller data plate
• Restore from USB
Pump data plate
• Restore from USB
Configuration
Part
Controller data plate
Pump data plate

8.5 Setup Wizard

Part
Language
Pump sensor setup
The option only
appears if the
controller is not
able to detect the
pump module.
Nominal voltage
Nominal current
System units
Select the date
Select the time
Pump name
Site name
Pump control mode AUTO
42
Default value Values
English For more
information, see
Language
38
None • Pump I/O
• FLS and thermal
switch
• Thermal switch
• None
0 V 0–9999 V
0 A 0–9999 A
Metric • Metric
• Imperial
Local time in the 00:00:00–23:59:00 The settings for the date
country of the
manufacturer
Date, today 2000-01-01 –
2099-12-31
– Four or more
characters
– Four or more
characters
• AUTO
• HAND
• Off
DCM 711 Installation, Operation, and Maintenance Manual
Description
The option to restore the controller ratings from an
external USB drive
The option to restore the configuration of the pump
data plate from an external USB drive
Description
The option to configure the controller manually
The option to configure the pump manually
Description
The available languages
on page
Pareo mode
• Pump I/O
The option to set
up the controller
so it is used with
a pump module
The nominal voltage of the pump
The option only appears if the controller
is not able to detect the pump module.
The nominal current of the pump
The option only appears if the controller
is not able to detect the pump module.
The settings for the units of
measurement
The settings for the time
The name of the pump
The name of the site
The pump control mode
Standard mode
The selection of the
pump sensors that
connect to the
controller
• FLS and thermal
switch
• Thermal switch
• None
No pump
sensors connect
to the controller.