Electrical Installation - Xylem FLYGT Pareo DCM 711 Installation, Operation And Maintenance Manual

4 Installation
2. Make the opening.
3. Remove the back cover of the control module.
4. Push the back of the control module into the opening.
5. Tighten the back cover on the back of the control module with 12 screws.
Use 4.6x16 mm (0.18x0.63 in) threaded screws for plastics.

4.4.3 Electrical Installation

4.4.3.1 Prerequisites
The electrical installation of the control module requires extra standard components:
• Two contactors
• Overload protection
• Main circuit breaker
• Voltage transformer
• Power supply, 24 VDC
The standard components are not delivered with the control module.
22
184.5 mm (7.3 in)
Ø 5 mm
(0.2 in)
DCM 711 Installation, Operation, and Maintenance Manual
184.5 mm (7.3 in)