ColorCue 1 AIR
Operating Modes
The device has 3 operating modes:
●
Manual
●
Static Colors (preset/user colors)
●
Chase Mode (preset/user chases)
Manual Mode
In this mode you can adjust the intensity of the colors (red, green, blue, white, amber and UV) of the
connected fixtures.
To adjust the intensity of the colors:
Press the MANUAL/SETUP button (24) to enter Manual mode. The LED on the button lights up.
Turn the controls (D)–(I) to select a color.
Note:
If you want to clear a selection, press the CLEAR button (23).
Press the MANUAL/SETUP button (24) again to exit Manual mode. The LED on the button turns off.
Note:
To enter Manual mode from preset colors mode and manually adjust a color, you need to fetch the last
output value of the respective color.
Turn the controls (D)–(I) clockwise or counterclockwise to fetch the value.
Static Colors Mode
In this mode you can select one of the 12 preset colors or 12 user-recorded colors.
Preset Colors Mode
In this mode you can select one of the 12 preset colors (warm white, daylight, yellow, gold, fire, pink,
purple, night blue, sky blue, cyan, grass, lime).
Press the FIXED COLORS button (13) to enter the Preset Colors mode. The LED on the button lights up.
Press one of the COLORS/CHASES buttons (1)–(12) to select a preset color. The LED on the button
lights up.
Turn the AMBER/STROBE control (H) to add strobe effect. The adjustment range is from low to high
frequency.
Press the FIXED COLORS button (13) to exit the Preset Colors mode. The LED on the button turns off.
The preset colors have the following DMX values:
Button
Preset color
1
Warm White
2
Daylight
3
Yellow
4
Gold
5
Fire
6
Pink
7
Purple
8
Night Blue
Product code: 50707
Red
Green
245
225
255
230
255
230
255
115
200
50
255
0
220
0
25
0
19
Blue
White
105
60
155
155
0
0
0
0
0
0
127
0
255
0
255
0
Amber
UV
235
0
0
0
135
0
255
0
50
0
0
255
0
255
0
255