Delete A Chase Step; Delete A Chase; Factory Reset - SHOWTEC ColorCue 1 AIR User Manual

ColorCue 1 AIR

Delete a Chase Step

To delete a chase step:
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button starts blinking.
Press the USER CHASES button (16) to enter User Chase mode. The LED on the button lights up.
Press the COLORS/CHASES button (1)–(12) which you want to edit. The LED on the button lights up.
Press the STEP+ (19) or the STEP- (20) button to select the step which you want to delete.
Press the DELETE button (22) to delete the step.
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button turns off.

Delete a Chase

To delete a chase:
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button starts blinking.
Press the USER CHASES button (16) to enter User Chase mode. The LED on the button lights up.
Press the COLORS/CHASES button (1)–(12) which you want to edit. The LED on the button lights up.
Press the DELETE button (22) and the COLORS/CHASES buttons (1)–(12) at the same time, to delete
the chase. The LEDs on all buttons blink 3 times.
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button turns off.

Factory Reset

You can delete all user-programmed colors and chases and set the fixture type to its default setting:
RGBWA-UV.
Press and hold down the RECORD button (21), the DELETE button (22) and the CLEAR button (23) at the
same time for 5 seconds to restore the default factory settings. The LEDs on all buttons blink 3 times.
Product code: 50707
24