ColorCue 1 AIR
6.
Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for use as a wireless LED DMX controller. It is suitable only for indoor installation. It is
not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Setup Mode
In this mode you can select the type of the LEDs of the connected lighting fixture(s).
01) Press and hold down the MANUAL/SETUP button (24) for 3 seconds. The LED on the button starts
blinking.
02) Press one of the following 6 buttons to select the LEDs type of the fixture:
●
(1) RGB
●
(2) RGBW
●
(3) RGBA
●
(4) RGBWA
●
(5) RGBWA-UV (default setting)
●
(6) RGBW-UV
The LED on the selected button lights up.
03) Press and hold down the MANUAL/SETUP button (24) for 3 seconds to exit setup mode. The LED on the
button stops blinking.
Product code: 50707
18
Fig. 09