Table of Contents
Advertisement
ColorCue 1 AIR
4.
Installation
Installation Site Requirements
●
The device must be installed only indoors.
●
The device can be positioned on a stable, flat surface, or mounted vertically or horizontally in an
opening.
●
The device can be operated from the flight case. See 3.4. Optional Accessories on page 11.
●
The maximum ambient temperature t
●
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
Mounting
The device can be mounted vertically or horizontally in an opening. Make sure that there is enough
space for ventilation and for the connected cables. See 3.5.1. Mounting Dimensions on page 11.
Fasten the device with 4 screws to the mounting surface.
Charging the Battery
DANGER
Risk of explosion caused by incorrect handling
This device contains a built-in rechargeable lithium-ion battery. The battery is not replaceable. The
battery may explode or cause burns if it is crushed, disassembled or exposed to fire or high temperatures.
●
Do not open the device and do not attempt to remove the built-in battery.
●
Do not crush or puncture the battery.
This device is delivered with an AC power adapter that is used to charge the battery. Before connecting
the power adapter to the socket-outlet, make sure that the power supply matches the input voltage
specified on the AC power adapter.
To charge the battery follow the steps below:
Press the power switch (T) to ON position.
Connect the AC power adapter to DC input connector
delivered with the device.
Connect the AC power adapter to the socket-outlet.
The battery LED indicator (O) changes colors depending on the battery status. See 4.3.1. Battery Statuses
on page 13.
●
Charge the battery before using the device for the first time.
●
Do not deep discharge the battery as this will shorten the battery's lifetime. Recharge the battery as
early as possible. Do not let the device operate until the battery is depleted.
●
Make sure that the battery is charged to at least 50 % before storing the device.
It is recommended to charge the device at an ambient temperature between 0 °C and 35 °C.
Refer to 3.3. Product Specifications on page 10 for the charge time of the battery.
Product code: 50707
= 40 °C must never be exceeded.
a
(S).
12
Use only the AC power adapter
Advertisement
Table of Contents
