Related Manuals for SHOWTEC Pixel Square 16 COB
Summary of Contents for SHOWTEC Pixel Square 16 COB
- Page 1 MANUAL ENGLISH Pixel Square 16 COB Ordercode: 41267 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Pixel Square 16 COB Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Frontside..................................7 Backside .................................. -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Pixel Square 16 COB 1 mounting bracket ... - Page 4 Leave the device switched off until it has reached room temperature. • If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
Pixel Square 16 COB Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. • The minimum distance between light output and the illuminated surface must be bigger than 1 meter. -
Page 6: Connection With The Mains
Pixel Square 16 COB The Pixel Square can be placed on a flat stage floor or mounted to any kind of truss with a clamp, or attached to each other by means of the retractable, built-in hooks. Improper installation can cause serious injuries to people and/or damage of property ! Connection with the mains Connect the device to the mains with the power plug. -
Page 7: Return Procedure
Pixel Square 16 COB Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 8: Description Of The Device
Pixel Square 16 COB Description of the device Features The Showtec Pixel Square 16 COB is a LED fixture with high output and great effects. Input voltage: 100-240V, 60/50 Hz Power consumption: 170W Light source: 16 x 9W COB RGB LED ... -
Page 9: Backside
10) LCD display + menu buttons Installation Remove all packing materials from the Pixel Square 16 COB . Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 10: Control Modes
Pixel Square 16 COB Control Modes There are 6 modes: Auto mode Built-in programs Static colors Sound-controlled Master/Slave DMX-512 (2CH, 3CH, 5CH, 12CH, 24CH, 48CH) One Pixel Square (Auto mode, Built-in programs and Static colors) 01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. -
Page 11: Multiple Pixel Squares (Dmx Control)
Pixel Square 16 COB Multiple Pixel Squares (DMX Control) 01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Plug the end of the electric mains power cord into a proper electric power supply socket. -
Page 12: Fixture Linking
Pixel Square 16 COB Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 13: Control Panel
Pixel Square 16 COB Control Panel A) LCD display MODE button C) SETUP button D) UP button DOWN button Fig. 05 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address the next time.) -
Page 14: Main Menu Options
Pixel Square 16 COB Main Menu Options Static colors Built-in programs Auto mode Sound-controlled mode DMX-512 mode Master/Slave mode 1. Static colors With this menu you can set the device’s static colors. 01) While in the main menu, press the MODE button until the display shows 02) Repeatedly press the SETUP button to switch between the colors (RED, GREEN, BLUE). -
Page 15: Sound-Controlled Mode
Pixel Square 16 COB 4. Sound-controlled mode With this menu, you can set the device’s sound-controlled mode. The device will react to the beat of the background music. 01) While in the main menu, press the MODE button until the display shows 02) Press the UP/DOWN buttons to increase/decrease the device’s sound sensitivity. -
Page 16: Channels
Pixel Square 16 COB 216-223 Program 21 224-231 Program 22 232-239 Program 23 240-247 Program 24 248-255 Sound-controlled mode Channel 2 – Program speed CH1 must be set between 56-247 0-255 Program speed adjustment, from slow to fast Channel 2 – Sound sensitivity... -
Page 17: Channels
Pixel Square 16 COB Channel 5 – Strobe Dimmer must be open 0-255 Strobe frequency, from OFF to highest frequency 12 channels Channel 1 – Red 1 0-255 Gradual adjustment Red, from dark to brightest Channel 2 – Green 1... - Page 18 Pixel Square 16 COB Channel 7 – Red 3 0-255 Gradual adjustment Red, from dark to brightest Channel 8 – Green 3 0-255 Gradual adjustment Green, from dark to brightest Channel 9 – Blue 3 0-255 Gradual adjustment Blue, from dark to brightest Channel 10 –...
-
Page 19: Channels
Pixel Square 16 COB 24 channels Channel 1 – Red 1 0-255 Gradual adjustment Red, from dark to brightest Channel 2 – Green 1 0-255 Gradual adjustment Green, from dark to brightest Channel 3 – Blue 1 0-255 Gradual adjustment Blue, from dark to brightest Channel 4 –... -
Page 20: Channels
Pixel Square 16 COB Channel 22 – Red 8 0-255 Gradual adjustment Red, from dark to brightest Channel 23 – Green 8 0-255 Gradual adjustment Green, from dark to brightest Channel 24 – Blue 8 0-255 Gradual adjustment Blue, from dark to brightest 48 channels Channel 1 –... - Page 21 Pixel Square 16 COB Channel 5 – Green 2 0-255 Gradual adjustment Green, from dark to brightest Channel 6 – Blue 2 0-255 Gradual adjustment Blue, from dark to brightest Channel 46 – Red 16 0-255 Gradual adjustment Red, from dark to brightest Channel 47 –...
-
Page 22: Maintenance
Pixel Square 16 COB Maintenance The Showtec Pixel Square 16 COB requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply and then wipe the cover with a damp cloth. Wipe the front glass panel clean with glass cleaner and a soft cloth. - Page 23 Pixel Square 16 COB Problem Probable cause(s) Solution One or more • Check if power is switched on and No power to the fixture fixtures do not cables are plugged in function at all Primary fuse blown • Replace fuse Fixtures reset The controller is not connected.
-
Page 24: Product Specifications
Pixel Square 16 COB Product Specifications Model: Showtec Pixel Square 16 COB Input Voltage: 100-240 VAC, 60/50Hz Power consumption: 170W (full output) DMX linking: 30pcs Fuse: F1,5A/250V Dimensions: 340 x 105 x 400 mm (LxWxH) Weight: 6,7 kg Operating and Programming:... -
Page 25: Dimensions
Pixel Square 16 COB Dimensions Ordercode: 41267... -
Page 26: Notes
Pixel Square 16 COB Notes Ordercode: 41267... - Page 27 Pixel Square 16 COB Ordercode: 41267...
- Page 28 ©2015 Showtec...