ColorCue 1 AIR
Setup Options
You can use the device to control lighting fixtures in 2 ways:
●
with wired DMX:
●
with wireless DMX:
Wired DMX Setup
To connect the device in a wired DMX setup, follow the steps below:
Use a DMX cable to connect the 3-pin DMX connector OUT (R) to the DMX IN connector of the
lighting fixture.
Power the device. See 5.4. Connecting to Power Supply on page 17.
Switch on the device. See 5.5. Switching On on page 17.
Power the lighting fixture.
Product code: 50707
1 lighting fixture with up to 6 channels (RGBWA-UV). See 5.3.1. Wired DMX
Setup on page 15.
Multiple lighting fixtures. See 5.3.2. Wireless DMX Setup on page 16.
15
Fig. 07