Test The Next Pod - HP 1660 Series Service Manual

Testing Performance
To test the threshold accuracy (logic analyzer)

Test the next pod

Using the 17-by-2 test connector and probe tip assembly, connect the data and clock
1 1
channels of the next pod to the output of the function generator until all pods have
been tested.
To unassign a pod pair and assign the next pod pair to be tested, press the Config key. Select
the pod pairs, then select assign or unassign in the pop-up menu.
Start with "Test the TTL threshold" on page 3− 10, substituting the next pod to be
2 2
tested for pod 1.
3–16