Further Information; Liability For Material Defects; Service & Repair - MICRO-EPSILON surfaceCONTROL 3D SC3200 Assembly Instructions Manual

11.

Further Information

For details on the individual programs or on setting the sensor parameters, please
refer to the respective software operating manuals or the operating instructions of this
sensor.
12.

Liability for Material Defects

All components of the device have been checked and tested for functionality at the
factory. However, if defects occur despite our careful quality control, MICRO-EPSILON
or your dealer must be notified immediately.
The liability for material defects is 12 months from delivery. Within this period, defec-
tive parts, except for wearing parts, will be repaired or replaced free of charge, if the
device is returned to MICRO-EPSILON with shipping costs prepaid. Any damage that
is caused by improper handling, the use of force or by repairs or modifications by third
parties is not covered by the liability for material defects. Repairs are carried out exclu-
sively by MICRO-EPSILON.
Further claims can not be made. Claims arising from the purchase contract remain
unaffected.
In particular, MICRO-EPSILON shall not be liable for any consequential, special, indirect
or incidental damage. In the interest of further development, MICRO-EPSILON reserves
the right to make design changes without notification.
For translations into other languages, the German version shall prevail.
13. Service, Repair
If the sensor or sensor cable is defective:
- If possible, save the current sensor settings
in a parameter set, see 3D-View, menu
Parameters > Save parameters to
file, in order to load the settings back
again into the sensor after the repair.
- Please send us the affected parts for repair
or exchange.
If the cause of a fault cannot be clearly
identified, please send the entire measuring
system to:
MICRO-EPSILON MESSTECHNIK GmbH & Co. KG
Koenigbacher Str. 15 · 94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0 · Fax +49 (0) 8542 / 168-90
info@micro-epsilon.com · www.micro-epsilon.com
Your local contact: www.micro-epsilon.com/contact/worldwide/
MICRO-EPSILON Optronik GmbH
Lessingstraße 14
01465 Langebrück / Germany
Tel. +49 (0) 35201 / 729-0
Fax +49 (0) 35201 / 729-90
optronic@micro-epsilon.com
www.micro-epsilon.com
X9771430-A012051HDR