Save & Exit - Nexcom NSA 7136 User Manual

Chapter 4: BIOS Setup
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Boot Mode Select
Configures the boot mode option.
USB Key Drive BBS Priorities
Adjust the boot sequence for USB devices. Boot Option #1 is the first boot
device that the system will boot from, next will be Boot Option #2 and so
forth.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced IntelRCSetup
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Boot Override
JetFlashTranscend 8GB 8.07
Version 2.17.1245. Copyright (C) 2015 American Megatrends, Inc.
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press
<Enter>. A dialog box will appear. Confirm by selecting Yes. You can also
press <F4> to save and exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting. You
can also press <ESC> to exit without saving the changes.
51
Security Boot Save & Exit
Exit the system setup after
saving the changes.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
NSA 7136 User Manual