Entering Characters For Other Functions - Avaya 9600 Series Manual

Related links
Entering Text Characters

Entering Characters for Other Functions

• Select a character by re-pressing the indicated button until the required character is
displayed. Then:
- Pressing another button enters that character and moves to entering the next character
from the newly selected button.
- Pausing for more than a second after pressing a button also enters the current character
and moves to entering the next character.
• You can select the text entry mode. The current mode is shown by the soft-key label as
below. Pressing the soft-key switches text entry to the next mode:
- abc – Lower-case.
- ABC – Upper-case.
- Abc – Capitalized.
- 123 – Number only mode.
- Hex – Hexadecimal only mode.
• Use the left and right cursor keys to move the cursor.
• Press Bksp to delete the character before the cursor.
Related links
Entering Text Characters
November 2021
on page 180
on page 180
Using 9600 Series Phones on Avaya IP Office
Comments on this document? infodev@avaya.com
Entering Characters for Other Functions
181