Manual Account Code Entry - Avaya 9600 Series Manual

Manual Account Code Entry

You can enter account codes during a call or before making a call. The account code that you
enter must match an account code set on the telephone system.
• Your system administrator can configure whether you can access this menu.
• Access to this menu can be assigned to a programmable button configured with the Account
Code action. See
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Account Code.
4. Press the Set soft key.
5. Enter the account code that you want to use.
6. Press the Done soft key.
7. If the account code was not a valid account code, the Failed menu is displayed.
Related links
Account Codes on page 112
November 2021
Programmable Feature Buttons
Using 9600 Series Phones on Avaya IP Office
Comments on this document? infodev@avaya.com
on page 150.
PHONE key and then press Features.
Manual Account Code Entry
113