Error Tones; Ringer Volume; Handset Volume - Avaya 9600 Series Manual

Error Tones

The phone provides an error tone when you make an invalid selection. You can disable the error
tone if required.
Procedure
1. Press the
2. Use the cursor keys to select Options & Settings.
3. Use the cursor keys to select Audio.
4. Use the cursor keys to select Error tones.
5. When completed, press Save.
6. Press Back/Exit to exit the menus.
Related links
Volume and Sound

Ringer Volume

You can adjust the ringer volume while the phone is idle or while it is ringing.
Procedure
1. With the phone idle or ringing, use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
Related links
Volume and Sound

Handset Volume

Whilst talking, you can adjust the volume of the incoming call. The volume is adjusted separately
for whichever device is in use (handset, headset or speaker).
Procedure
1. With the call connected, use the + plus and – minus keys to adjust the volume.
2. The display returns to normal after a few seconds.
Related links
Volume and Sound
November 2021
button. On 9621/9641 phones, select Settings.
on page 146
on page 146
on page 146
Using 9600 Series Phones on Avaya IP Office
Comments on this document? infodev@avaya.com
Error Tones
147