Using The Board; Product Overview - Analog Devices EVAL-AD2437A1MZ Manual

2 Using the Board

This chapter provides information on the major components and peripherals on the board, along with instructions
for installing and setting up the emulation software.

Product Overview

The board features:
• Analog Devices AD2437 - Audio Bus Transceiver
• Analog Devices
ADA4841 - Low Power, Low Noise and Distortion, Rail-to-Rail Output Amplifiers
• Analog Devices
ADG774 - CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux
• Analog Devices
ADM6315 - Open-Drain Microprocessor Supervisory Circuit
• Analog Devices
ADP2360 - 50 mA, 60 V, High Efficiency Buck Regulator
• Analog Devices
MAX16823AUE - High-Voltage, 3-Channel Linear High-Brightness LED Driver
• Analog Devices
MAX22503E -100Mbps Full-Duplex 3V/5V RS-485/RS-422 Transceiver with High EFT Im-
munity
• TDK
MMICT390200012 - Digital Output MEMS Microphone
• Audio
• Analog Devices
• Analog Devices
• Input and Output SPDIF Connectors with galvanic isolation
• ADC Input and DAC Output 3.5mm connectors
• A
2
B
• Two RJ45 Shielded Terminals
• LEDs
• 11 LEDs: more details will be in LED section
EVAL-AD2437A1MZ Manual
ADAU1452 - SigmaDSP Digital Audio Processor
AD1937 - Four ADCs/Eight DACs with PLL, 192 kHz, 24-Bit Codec
Using the Board
2–1