Related Manuals for Analog Devices EVAL-AD2437B1MZ
Summary of Contents for Analog Devices EVAL-AD2437B1MZ
- Page 1 EVAL-AD2437B1MZ Manual Revision 2.1 , August 2023 Part Number EVAL-AD2437B1MZ Analog Devices, Inc. One Technology Way Norwood, MA 02062-9106...
- Page 2 Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Ana- log Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under the patent rights of Analog Devices, Inc.
-
Page 3: Table Of Contents
Manual Contents ............................1–2 Technical Support ............................1–3 Supported Integrated Circuit ......................... 1–3 Supported Tools............................. 1–3 Product Information ............................1–3 Analog Devices Website..........................1–3 EngineerZone ............................. 1–4 Using the Board Product Overview ............................2–1 Package Contents............................2–2 Default Configuration ........................... 2–2 Reference Design Information ........................ - Page 4 ADAU1701 I2C Bus Switch ( P18 and P22)..................3–5 LEDs ................................3–5 B Interrupt ( DS2)..........................3–6 Power Status Indicator ( DS1, DS3, DS5) ....................3–6 I2C Bus Switch ( DS4) ..........................3–7 BD28623MUV Error Status ( DS6) ......................3–7 EVAL-AD2437B1MZ Manual...
-
Page 5: Preface
Refer datasheet/manual to get more details about AD2437. The EVAL-AD2437B1MZ is configured to be a Bus-Powered Sub (BPS) node. The EVAL-AD2437B1MZ can be connected to a Main Node, Local-Powered Sub (LPS) or a Bus-Powered Sub (BPS) Node. These evaluation boards are intended to be used with the SigmaStudio+ graphical development tool. -
Page 6: Purpose Of This Manual
DSP code writing experience to easily implement a DSP into their design and yet is still powerful enough to satisfy the demands of experienced DSP designers. SigmaStudio+ links with both Analog Devices evalua- tion boards and production designs to provide full in-circuit real-time IC control. -
Page 7: Technical Support
Also note, MyAnalog.com is a free feature of the Analog Devices website that allows customization of a web page to display only the latest information about products you are interested in. You can choose to receive weekly e-mail notifications containing updates to the web pages that meet your interests, including documentation errata against all manuals. -
Page 8: Engineerzone
If you are a registered user, just log on. Your user name is your e-mail address. EngineerZone EngineerZone is a technical support forum from Analog Devices, Inc. It allows you direct access to ADI technical support engineers. You can search FAQs and technical information to get quick answers to your embedded process- ing and DSP design questions. -
Page 9: Using The Board
This chapter provides information on the major components and peripherals on the board, along with instructions for installing and setting up the emulation software. Product Overview The board features: • Analog Devices AD2437 - Audio Bus Transceiver • Analog Devices ADA4661 -18 V, Precision, 725 µA, 4 MHz, CMOS RRIO Operational Amplifier • Analog Devices ADP2360 - 50 mA, 60 V, High Efficiency Buck Regulator •... -
Page 10: Package Contents
• 1m RJ45 Cable • A B Software - Online Request Documention Contact the vendor where you purchased your EVAL-AD2437B1MZ evaluation board or contact Analog Devices, Inc. if any item is missing. Default Configuration The Default Hardware Setup figure shows the default settings for jumpers and switches and the location of the jumpers, switches, connectors, and LEDs. -
Page 11: Reference Design Information
Figure 2-1: Default Hardware Setup Reference Design Information A reference design info package is available for download on the Analog Devices Web site. The package provides information on the schematic design, layout, fabrication, and assembly of the board. The information can be found at: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-... -
Page 12: Ada4661 -18 V, Precision, 725 Μa, 4 Mhz, Cmos Rrio Operational Amplifier
3.3 V, 5 V, 10 V, 12 V and 15 V, and dual supplies of ±2.5 V, ±3.3 V, and ±5 V. It uses the Analog Devices, Inc., patented DigiTrim® trimming technique, which achieves low offset voltage. -
Page 13: Adp2360 - 50 Ma, 60 V, High Efficiency Buck Regulator
Its high operating frequency allows the use of tiny, low cost inductors and capaci- tors, resulting in a very small solution. Constant frequency above the AM band avoids interfering with radio recep- tion, making the LT3502A particularly suitable for automotive applications. Cycle-by-cycle current limit and EVAL-AD2437B1MZ Manual 2–5... -
Page 14: M24512-Rmn6Tp - Automotive 512-Kbit Serial I 2 C Eeprom With 1Mhz Clock
All these devices operate with a clock frequency of 1 MHz (or less), over an ambient temperature range of –40 °C / +85 °C. The M24512-D offers an additional page, named the identification page (128 byte). The identification page can be used to store sensitive application parameters which can be (later) permanently locked in read-only mode. 2–6 EVAL-AD2437B1MZ Manual... -
Page 15: Hardware Reference
Hardware Reference 3 Hardware Reference This chapter describes the hardware design of the EVAL-AD2437B1MZ. Connectors This section describes connector functionality and provides information about mating connectors. The connector locations are shown in the Connector Locations figure. EVAL-AD2437B1MZ Manual 3–1... -
Page 16: Stereo Connectors( Tp5-Tp8 )
Figure 3-1: Connector Locations Stereo Connectors( TP5-TP8 ) TP5-TP8are used to connect stereo speakers to the board. It is not recommended that speaker impedance be lower than 8 Ohms. Connector Speaker Side SPKR L- SPKR L+ SPKR R- SPKR R+ 3–2 EVAL-AD2437B1MZ Manual... -
Page 17: Audio I2S Connector ( P1)
P21 is used to connect towards a Sub Node and P27is used to connect towards the main node. These connectors allow the AD2437 on the eval board to allow communication with other A B devices on the bus. Part Description Manufacturer Part Number RJ45 - Ethernet Amphenol ICC RJE73-188-00210 Mating Cable Ethernet cable assembly EVAL-AD2437B1MZ Manual 3–3... -
Page 18: Jumpers
Figure 3-2: Jumper Configurations AD2437 SIO0 Routing ( P4) The AD2437 SIO0 jumper can be configured as ADAU1701_SDATA_OUT or PDM_DATA0. The default setting for the jumper is pins 1 and 2. Jumper Routing 1 and 2 (DEFAULT) PDM_DATA0 3–4 EVAL-AD2437B1MZ Manual... -
Page 19: Ad2437 Sio1 Routing ( P23)
1 - > 0 OPEN - > CLOSED SELFBOOT of ADAU1701 from Boot EEPROM OPEN Parameter write from ADAU1701 to BOOT EEPROM LEDs This section describes the on-board LEDs. The LED Locations figure shows the LED locations. EVAL-AD2437B1MZ Manual 3–5... -
Page 20: A 2 B Interrupt ( Ds2)
Power Status Indicator ( DS1, DS3, DS5) The Status Indicators indicate Supplies health i.e. They will be on when the respective supply will be available on board. DS5 : +5.0V DS1 : +3.3V DS3 : Power ON 3–6 EVAL-AD2437B1MZ Manual... -
Page 21: I2C Bus Switch ( Ds4)
An error flag is outputted for output short protection, DC voltage protection in the speaker, and high temperature protection. By default, this LED will be high. When low, an ERROR has ocurred. Refer to the BD28623MUV datasheet for more information on what causes the error indication. EVAL-AD2437B1MZ Manual 3–7... - Page 22 EVAL-AD2437B1MZ Manual...
Need help?
Do you have a question about the EVAL-AD2437B1MZ and is the answer not in the manual?
Questions and answers