Package Contents; Default Configuration - Analog Devices EVAL-AD2437A1MZ Manual

Package Contents

• Switches
• Two Switches: Reset and Gain
• Barrel Jack and Wire-to-Board Terminal
• 24V @3 Amps
Package Contents
Your EVAL-AD2437A1MZ package contains the following items.
• EVAL-AD2437A1MZ board
• EVAL-ADUSB2EBZ (Rev 1.5 or above)
• 1m RJ45 Cable
• Universal 24V DC power supply
• A
2
B Software - Online Request Document
Contact the vendor where you purchased your EVAL-AD2437A1MZ evaluation board or contact Analog Devices,
Inc. if any item is missing.

Default Configuration

The Default Hardware Setup figure shows the default settings for jumpers and switches and the location of the
jumpers, switches, connectors, and LEDs. Confirm that your board is in the default configuration before using the
board.
2–2 EVAL-AD2437A1MZ Manual