Xerox AltaLink C81 Series User Manual page 342

Troubleshooting
4. To open the staple cartridge clamp, pull the clamp in the direction shown.
5. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks
into the locked position.
The points of the jammed staples are sharp. Remove the jammed staples
WARNING:
carefully.
6. Grasp the staple cartridge by the orange handle, then insert the cartridge into the stapler
assembly until the staple cartridge clicks into place.
7. Return the stapler assembly to the original position, then close the finisher door.
342 Xerox AltaLink
®
User Guide
C81XX Series Color Multifunction Printer
®