Troubleshooting
3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
4. To remove the jammed staples, pull the staples in the direction shown.
The points of the jammed staples are sharp. Remove the jammed staples
WARNING:
carefully.
5. Hold the tabs on both sides of the staple cartridge and insert the cartridge into the original
position in the finisher.
Note:
If you have trouble inserting the cartridge, ensure that the staples are positioned
correctly in the cartridge.
Note:
The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
6. Repeat the procedure for the other staple cartridge.
7. Close the finisher side cover.
340
Xerox
AltaLink
®
User Guide
C81XX Series Color Multifunction Printer
®